We provide support to several different categories of test participant including:
We will provide a test environment during the Pre-UIT stage to enable test participants to confirm that they can send and receive messages across the User Gateway. The manner in which the Pre-UIT environment can be used will set out the Guide for Testing Participants.
We have developed a test tool, called GBCS Integration
Testing (GIT) for Industry (GFI), to support the development
and testing of meters.
User Entry Process Tests and SMKI and Repository Entry Process Tests can be conducted in the Interface Testing stage, End-to-End Testing stage and Enduring Testing phase.
Test Participants can use the CSP Test Labs or a Remote Testing Service (subject to meeting entry criteria) to test the interoperability of their devices and back office systems against the DCC.
As part of the consultation in June 2015, on the first part of
the Enduring Testing Approach Consultation, DCC proposed a set of
limits relating to the Certificate Signing Requests that Testing
Participants may submit and the number that DCC shall be obliged to
These limits are set out in the table below:
|Limits for submitting Certificate Signing Requests for testing|
|Each Testing Participant shall not submit more than 25,000 CSRs per day.|
|DCC shall not be required to process any Certificates Signing Request (across all SMKI interfaces) in excess of 100,000 (and not 375,000) per day. Certificate Signing Requests exceeding this number shall be queued for processing as soon as reasonably practicable.|
|If a Testing Participant foresees a need to submit in excess of 12,500 Device Certificate Signing Requests through the SMKI Portal interface in any 24 hour period, the Testing Participant shall use reasonalbe endeavours to inform the DCC of the potential additional load at least seven days in advance via the DCC Service Desk. The Batch or Batches exceeding this number shall be queued for processing as soon as reasonably practicable.|
|Each Party shall use reasonable endeavours not to submit more than one CSR via the Ad Hoc Device CSR Web Service interface in amy 1.6 second period (and not 0.8 second period).|
DCC will advise in the event that these limits are revised.
DCC is publishing the Guide for Testing Participants. The document is required to describe which persons are eligible for which Testing Services, and on what basis (including any applicable Charges). This version of the guide also provides clarity and helpful information regarding aspects Transitional Testing.
The Guide to SMKI and Repository Entry Process Tests sets out
the information that a Party is required to provide in support of
its application to complete the SMKI and Repository Entry Process
This document provides further explanation of the testing approach set out in the SMKI and Repository Test Scenarios Document.
Successful completion of the SREPT is a requirement before a Party or RDP is entitled to:
(a) apply to become an Authorised Subscriber for the purposes of
any Certificate Policy; or
(b) access the SMKI Repository.
Version 3.11 of the End-to-End Testing Approach Document was approved by the SEC Panel on 8 July 2016. DCC is publishing the document in accordance with Section T4.9 of the SEC.
This guide has been published as a working document for Testing Design and Execution Group members and it will be updated to accommodate comments and re-published on the website.